What files do you need for a 3D rendering? One of the first questions on any project is simple: what do you need from me to start? The honest answer is that you do not need a finished 3D model, and you do not need everything to be perfect. But what you send shapes how accurately the work goes and how smoothly it runs, so it is worth getting right.
This is the checklist we use in 2026, why a PDF on its own is not enough, and what we do when the files are incomplete, which is most of the time.
The Checklist: What to Send a Rendering Studio
You do not need every box ticked to start, and nothing here has to be perfect. Send what you have, and the file review will show what is missing. Here it is, grouped the way a rendering studio actually needs it.
Design Files
- Native files if they exist: CAD, Revit, SketchUp, Rhino or another 3D model. This carries the geometry and dimensions a model is built from, so as little as possible has to be guessed.
- If there is no 3D model, send 2D plans, elevations and sections. This is what we build the 3D model from when one does not exist yet.
- If all you have is a PDF, ask the architect or developer whether a CAD or 3D file exists anywhere, and chase it early. A PDF shows the design, but it takes more interpretation and modeling time than a coordinated file.
- For a multi-unit building, the unit mix and which units need images. This tells us which floor plans to prioritize and how many variations the set needs.
Site and Context
- Landscape plan, site plan, neighboring buildings and orientation. This sets the real surroundings and the direction of light.
- A lighting plan, if one exists. It helps match fixture placement where it matters.
- Any drone or site photography. Needed if an aerial or exterior view has to show the real setting rather than a generic one.
Finishes and Furniture
- The finish schedule, plus the closest reference you have for each key finish. The closer the reference, the more exact the match.
- Furniture or fixtures that must be exact: item name, model and manufacturer, or a link. This lets us model the real piece instead of approximating it.
- Existing photos of the site, or of any existing building there. Useful context for matching materials and conditions that are already there.
People and Contacts
- Names and emails for the architect, interior designer and landscape designer. So the real files can come straight from them rather than second-hand.
- Brand guidelines, if a branding agency is already involved. Keeps the images consistent with the branding already built for the project.
Purpose
- What the images are for: a sales launch, a planning submission, an investor presentation or a leasing campaign. This changes what is built and how it should look.
- Where the images will run: print, web, social, a sales gallery or a planning board. This affects the formats delivered.
And three questions worth asking any studio before you commit, covered in full further down this page: will they review your files before quoting, will they agree camera angles on a plain white model before any finishes go in, and how many revision rounds are included.
What to Send to Start
Send the design in whatever form it exists. That usually means CAD drawings, a Revit model, or a SketchUp or other 3D model, anything that shows the design. Alongside that, the more of the full design package you share the better: elevations, finishes and material specs, landscape information, interior direction, and site details all help.
A good rule is to send more rather than risk leaving something out. The first conversation establishes what the project needs to do; the file review then confirms what is actually there and what has to be created before production starts. If the images are for a review board or an owner sign-off rather than a sales campaign, say so at the start, because it changes what we build; see approval renderings vs sales renderings.

Why a PDF Isn’t Enough on Its Own
A PDF is useful at the start. It communicates intent, shows the design, and helps everyone get on the same page. What it does not carry is the geometry, dimensions, and spatial information that a 3D model is built from. A flat document cannot be turned directly into an accurate model; it has to be interpreted and rebuilt.
We can work from PDFs, sketches, and plans when that is what exists. They simply take more interpretation and modeling than a coordinated 3D file, which is why we review what you have before quoting rather than quoting blind. A CAD file or an existing 3D model is always far better to send than a PDF alone.

No 3D Model? We Build It
A CAD or Revit model is ideal, but it is not a requirement to begin. When no 3D model exists, we build it ourselves from your 2D plans, elevations, and drawings. This is normal, and many strong projects start exactly this way. Our architectural 3D modeling guide explains how that model is built and what it is used for.
This is also why our process begins with a file review, the design-alignment stage of the rendering process. We confirm what exists, what is missing, and what needs to be created, so the modeling effort is understood before production rather than discovered mid-project. If the design itself is not finished, that becomes part of the conversation too, design work can be defined and scoped separately so the imagery is buildable rather than guessed.

If You Already Have a Model
A supplied model can save time, but only if it is usable. We always review existing 3D assets first to check they are built to a standard we can render from. A clean model speeds things up. A messy one can cost more to repair than to rebuild, in which case starting fresh is the better path. More on how that works is on our render your existing model page.
We will tell you honestly which it is rather than inherit a problem. The same applies when taking over a model from a previous vendor: sometimes it saves work, sometimes a rebuild is cleaner, and the file review is where we find out.
Furniture, Finishes, and References
For furniture, fixtures, and equipment, the level of detail depends on the production level. Standard work can use library assets matched to the design; premium work uses custom-modeled pieces. To model a specific real piece accurately, we need the exact item name, model, and manufacturer, or links and brochures, so the result matches the real thing rather than approximating it.

For materials and finishes, the closer the reference the more exact the match. Physical samples, spec sheets, supplier links, or clear photos all work. Confirming these early, at the moodboard stage, is how corrections later in the process are avoided. If you only have a moodboard and a few plans, that is fine too, incomplete inputs are normal and we are built to handle them.
Three Questions Worth Asking First
Beyond what you send us, here are three questions worth asking any studio before you commit:
- Will you review all our files before pricing the project, and tell us what is missing?
- Will we approve the camera angles on a plain white model before any finishes go in?
- How many revision rounds are included, and at which stages?
These are the questions we answer before any project starts. Send your plans with a line on where the project stands and what the images have to achieve, and request a project review. We will go through the files and come back with what is missing and how we would approach the project.
Frequently Asked Questions
What file formats do you accept?
Most standard architecture and 3D formats, including Revit, SketchUp, Rhino, and AutoCAD. If you are unsure whether your files will work, send them and we will check at the review stage.
Can you work from 2D plans if I have no 3D model?
Yes. We build the 3D ourselves from plans, elevations, and drawings. A model speeds things up but is not required to begin.
Why can't you just quote from a PDF?
A PDF shows the design but does not carry the geometry and dimensions a model is built from. We review what you have so the quote reflects the real work, rather than quoting blind.
Can I start with just a PDF?
Yes, a PDF can start a project. It shows the design and lets us begin the file review, but it carries no geometry or dimensions, so it takes more interpretation than a coordinated CAD or 3D file. We review whatever you send before quoting, rather than quoting blind.
Can you reuse our existing model?
Often, when it is clean and built to a usable standard. We check quality first and tell you honestly whether it saves work or whether a rebuild is the better path.
What if our design isn't finished?
Then design work can be defined and scoped separately and run ahead of visualization, so the imagery is buildable. We flag this in the proposal rather than mid-project.
What if the design is still changing?
That is normal, and the file review flags it rather than treating it as a problem. We agree every camera angle on a plain white model before any materials go in, so changes made before that point cost very little. Changes made after materials and lighting are applied are a redesign, not a revision.






